151 Fairview Estate Rd
Albertville, AL 35951
ph: 256-504-1788
info
We service Northeast and central Alabama and most other surrounding cities. Just ask us and we'll tell you if you're too far out for us.
1. Contact us for a free bid. We'll come out to discuss your options and answer any questions you have. We'll estimate where the curbing will be and will receive a bid proposal of what it will cost.
2. When we come out, we will mark the locations with marking paint to make sure this is what you want. Or, if you want to mark it out yourself with a garden hose or electrical cord, that will help too. Then, once we get there we'll go over that with marking paint once your satisfied with the locations.
3. After the marking paint is done, we'll take a sod cutter and remove any sod. We'll also prep the ground so it's ready for curbing. The sod cutter will leave a 10" strip where the curb will be laid.
4. We'll mix the concrete (including strengthening fibers) and add color if requested. The concrete is shoveled into a wheelbarrow and taken to the curbing machine, which will extrude the concrete. During this process, we'll trowel the curb to get it smooth.
5. Then, we'll stamp the curbing if it's requested AND if it's slant style curbing.
6. Lastly we will seal the curbing to make the color last without fading.
If all is satisfactory with you at this point we will then collect all monies due.
What we need from customers before we start!
What kind of prep-work do I need to do before the installers come out?
* Make sure all sprinklers are turned off.
* Do not water your lawn less than 12 hours prior to our arrival.
* Make sure lawn has been cut at least 2 days prior to our arrival.
* All sprinkler heads must be marked. (We will not be held liable for damage for unmarked heads.)
* Color variations are to be expected, due to jobsite conditions, weather conditions, dye lot differences and finishing techniques.
151 Fairview Estate Rd
Albertville, AL 35951
ph: 256-504-1788
info